ABS filament Orange
Name： Filament
Model: ABS
Color: Multiple colour
Package: Roll
Specification: D 1.75mm, W 1kg
FILAMENT FOR 3D PRINTER
Product Description：
ABS (Acrylonitrile Butadiene Styrene) thermoplastic 3d printing filament is a premium grade material, excellent for detailed and functional 3D printing applications. ABS filament is produced from fossil fuels, which is not biodegradable as would be PLA. Use ABS filament for outdoor environment applications.
Product properties：
01 General Usage
ABS filament is a very popular and commonly used engineering thermoplastic throughout industry because of its toughness, strength, material capatability and resistance to moderate temperature changes. ABS prints with good flow and is resistance to corrosion and abrasion. ABS filament printing should be used in a well ventilated area. To minimize the high liguid to solid distorsions during printing it is recommended that a printer with a heated print bed be used. Generally the printer bed temperature should be set at approximately 80° to 110°C and a cooling fan not be used during printing. .
02 Parameter
*Printing temperature 220 to 245°C, *Heated bed capable printer recommended 8o° to 110'C, *Tear strength 124 MPa sample average value *Thermal Conductivity o.1 W/(mK) *Density (p) 0.9 g/cm3 - 1.53 g/cm3 : median 1.07 g/cm3 *Relative elongation 15% sample average value, *Solubility the product reacts with water (a slow and longterm process) Scent nearlyodorless, *Physical state solid Stability stable under normal conditions , *Toxicity: Toxic to humans and animals , *Filament diameter standards are 1.75mm or 2.90mm *Acids - concentrated Good, *Acids - dilute Excellent *Alcohols - Poor,• Alkalis - Excellent, *Aromatic hydrocarbons - Poor, *Halogenated hydrocarbons-poor .
......................................
Normal Printing Quality:
*Print Speed: 45 mm/sec
*Printing Temperature: 245° C
*Bed Temperature: 95 ° C
*Ambient Printer Temperature: 24 - 27° C
*Layer Height: 0.22 mm: Shell Thickness: 1.0 mm
*Bottom/Top Layer Thickness: 1.1 mm
*Fill Density: 20% Diamond
High Printing Quality:
*Print Speed: 45 mm/sec
*Printing Temperature: 245° C: Bed Temperature: 95 °C
*Ambient Printer Temperature: 24 - 27° C
*Layer Height: 0.18 mm: Shell Thickness: 1.0 mm
*Bottom/Top Layer Thickness: 1.08 mm
*Fill Density: 20% Diamond
Fast Printing Low Quality:
*Print Speed: 45 mm/sec
*Printing Temperature: 245°
*Bed Temperature: 95 ° C
*Ambient Printer Temperature: 24 - 27° C
*Layer Height: 0.35 mm: Shell Thickness: 1.0 mm
*Bottom/Top Layer Thickness: 1.05 mm
*Fill Density: 2o% Diamond
